The MD90TSE replaced the 100T in our line with the same features.
Features as the 90T, plus …
- Upgraded audio section with Solen polypropylene capacitors plus by-pass caps
- Brass flywheel and brass clutch precision tuning mechanism
- Balanced output
Options
- Silver faceplate
- Precision remote control
- Burr Brown up-converting and oversampling DAC 24/192
- Audio upgrade (to 105)
Specifications
- Usable sensitivity- Mono – 0.7 uV 9.0 dBf
- 50 dB quieting – Mono – 2.0 uV 9.9 dBf
- 50 dB quieting – Stereo – 2.3 uV 25.0 dBf
- Capture ratio – 1.5 dB
- Image rejection – 110.0 dB
- Signal to noise ratio – 80.0 dB
- Alternate channel – Wide – 40.0 dB
- Alternate channel – Narrow - 70.0 dB
- Adjacent channel – Wide – 3.0 dB
- Adjacent channel – Narrow - 35.0 dB
- THD – Mono – 0.10 %
- THD – Stereo – 0.18 %
- Stereo separation – 50.0 dB
- AM suppression – 70.0 dB
- SCA rejection – 80.0 dB
- IF rejection – 80.0 dB
- 19 KHz and 38 KHz component rejection – 75.0 dB
- Audio frequency response (+/- 1 dB) – 15 Hz – 17 KHz
- Balanced audio output (600 ohms) – 2.2 V
- Line audio output (RCA) – 1.0 V
- Line power (Must be specified) –110/220/230/240- VAC
- Dimensions (inches H.W.D.) – 4 x 17.75 x 13
- Dimensions (cm H.W.D.) – 11.43 x 48.3 x 38.1
- Weight (lbs./kgs) - 18/7.96
- Power consumption (Typ/Max) - 50w/100w
- TUBE SPECIFICATIONS
- Filament current (max) 330 mA (min) 270 mA
- Anode current (1) (max) 1.07 mA (min) 0.92 mA
- Anode current (2) (max) 1.07 mA (min) 0.92 mA
- Total harmonic distortion < 1.8%
Optional Built-In Burr Brown up-converting and oversampling DAC 24/192 has always 3 inputs. Standard suggested input setup is 1xUSB, 1x Tos-Link, 1xS/PDIF coax. Customer can select any type combination. For instance it is possible to have 2xS/PDIF coax & 1xUSB etc.
2 Year (Tubes 6 Month)
