DESCRIPTION
Standmount, two-way, bass reflex speaker system made of combination of natural wood and MDF. The front baffle is made of real wood with a thickness of 35 mm to 60 mm. The other enclosure parts are made of MDF finished with real wood veneer. Inside of the speaker enclosure baffle consists of nine open chambers made of MDF material (CSWA system) with a thickness of 25 mm. For better reinforcement of the baffle, three millimeter-thick bitumen sheets combined with textiles are glued on the exposed places. This design has effectively suppressed standing waves and prevented the transmission of resonances to the baffle. A new type of cushioning material, Twaron® - Angel Hair, is used for damping, freely distributed in all chambers. High-quality internal cables and gold-plated terminals for bi-wiring or bi-amping are used to connect to the amplifier.
Adam Vox use top of the line Morel drivers, and crossovers contains high-quality passive components from Mundorf® or other manufacturers (on request).
MATERIAL USED AND FINISH
Enclosure real wood veneer is matched to massive real wood front baffle. Wood is finished exclusively by waxing. Hard oil wax is used for the top layer.
| Power (IEC) | 150W |
| Nominal impedance | 8Ω (min. 7,2Ω / 180Hz – 200Hz – 6,8 Ω / 6kHz – 8kHz) |
| Sensitivity | 87dB – 1W/1m |
| Frequency response | 50Hz – 20 kHz (+0/- 3 dB ) |
| Drivers | Tweeter: 1,1" Morel – 1 piece Middbass: 6" Morel – 1 piece |
| Recommended amplifier power | 50W – 200W |
| Dimensions (W x H x D) | 230 x 370 x 375mm |
| Weight | 17kg (37lb) / piece |
| Dimensions (W x H x D) | 645 x 205 x 320mm |
| Weight | 15kg (33lb) piece |
ADAM VOX
High-End Loudspeakers Hand Made in Europe (Slovakia). The goal is to manufacture loudspeaker systems that could reproduce the real sound, what became an absolute priority in their development.
