A hi-fi system basically reproduces nothing other than modulated household electricity. This means this should arrive at the device as constantly as possible. Here the mains cable (power cable) plays a significant role. The big challenge for power supply cables is extreme current peaks. They are caused by the connected devices themselves converting alternating current into direct current. These extreme current peaks cause a whole range of undesirable effects.
Specially designed for connecting up top-notch high-end audio systems, the Referenz AC-2405 AIR mains power cable is based on the already legendary AIR technology. In conjunction with this technology, i.e. the "omission" of insulation material, which would "soak up" part of the energy like a sponge, the Referenz AC-2405 AIR is able to transport very large amounts of energy in a very short time. Many design details of the Referenz AC-2405 AIR counteract the undesirable effects and make it an outstanding energy pipeline for the highest audiophile requirements.
However much we focus on high-end sound, safety plays a particularly important role in this cable category. For this reason, every Referenz AC-2405 AIR cable is tested extremely carefully. In addition to an exhaustive functional test, each cable is also subjected to an insulation and high-voltage test. The results are documented, and each cable is given an individual serial number.
NEW: Now available with open cable heads
The Reference AIR power cords are now also available with open cable heads for self assembly with individual plugs of your choice. Please note the following safety instructions when processing the cables:
This power supply cable may only be assembled / processed by an electrical and qualified specialist!
After assembly, the power supply cable must be checked and marked after the country- and product regulations!
The connecting power is connector-specific and is a maximum of 230Vac / 16A! (Test voltage: 1.500V)
| Application: | High-end mains power connection |
|---|---|
| Cable diameter: | 25 mm |
| Conductor material: | High-purity copper |
| Conformity: | CE, REACH, RoHS |
| Cross-section: | 2 x 3 mm² (4 x 1.5 mm²) |
| Customized assembly: | On request |
| Design: | 4-fold multicore| Ground wire |
| Dielectric: | Air |
| Individual inspection: | Function, High voltage, Insulation |
| Jacket: | PE network jacket |
| Length: | 1 m, 1.5 m, 2 m, 3 m |
| Load capacity: | 3680 W (230 V AC/16 A) |
| Protection class: | 1 |
| Rated current: | 16 A |
| Rated voltage: | 250 V AC | 50/60 Hz |
| Shielding: | Dense copper braid, tin-plated (oxidation protection) |
| in-akustik product group: | Power supply |
| in-akustik category: | Power cords |
| Quality: | Referenz |
| Technology: | AIR Helix Point-to-PointMulticore |
| Connector: | Open cable heads |
| Made in Germany: | Yes |
