Electrical installations in buildings are usually carried out professionally, but often as cheaply as possible. This means that the cables from the fuse box usually have to run via several junction boxes and terminal points to reach the sockets. Each terminal point means additional contact resistance and additional loads from other consumers in the room, leading to losses and interference in the power supply. Ideally, a separate line should be laid from the fuse box to the socket of the hi-fi system. The Referenz AC-2503M is particularly suitable for this application. In addition to its large conductor cross-section of 3 x 2.5 mm², it has a shield that protects the components from electromagnetic interference along the entire length from the fuse box.
Application: For a separate power supply from the fuse box to the socket of the hi-fi system.
Optimum power supply: The direct connection from the fuse box to the system avoids contact resistances and any interference caused by terminal points etc.
Stable performance: A full conductor cross-section of 3 x 2.5 mm² minimizes resistance and provides sufficient substance even in dynamic passages.
Shielding: Tight foil shielding protects the sensitive signals from interference, so preserving the fine details.
WARNING: The cable must be installed by a professional!
| Application: | High-end power cable for building installations |
|---|---|
| Bending radius: | 50 mm |
| By the meter: | Yes |
| Cable diameter: | 12 mm |
| Conductor material: | High-purity copper |
| Conformity: | CE, REACH, RoHS |
| Cross-section: | 3 x 2.5 mm² |
| Design: | (N)YM(St)-J 3G2.5 300/500 V |
| Flame retardant: | IEC 60332-1-2 Class Eca |
| Nominal voltage: | 300/500 V AC |
| Rated current: | 16 A |
| Shielding: | Dense foil shield, Drain wire |
| Temperature range: | -40 to +70°C |
| Test voltage: | 2000 V |
| in-akustik product group: | Power supply |
| in-akustik category: | Power cords |
| Quality: | Referenz |
| Connector: | By the meter |
| Made in Germany: | Yes |
