NEW REED Tonearm & Turntable

NEW REED Tonearm & Turntable

Posted by Teo Lysy on 6th Jun 2023

REED MUSE 3A 

The turntable “Reed Muse 3A” was designed innovatively using the principles of the Bauhaus Style. This turntable meets the highest quality requirements. 

The entire body of this turntable (including the bottom) is made out of birch plywood, which makes it durable, stable, and non-resonant. This model “Muse 3A” could be coated in three different colours: Carnelian Red, White and Black – depending on the customer’s choice. The platter, which is raised slightly above the main body, and hidden supports (feet) create an illusion of a light, almost hovering item, although the turntable is quite heavy. 

The main bearing system of model “Muse 3A” is the same as in model “Muse 3C”. It is a reverse sliding thrust ball bearing for a main axis. The bearing ball is made from stainless steel and the lateral stability is achieved by using a very durable and low-noise sliding bearing. 

“Muse 3A” turntable has a user changeable traction system. It can be switched to a belt drive or friction drive very easily (same as Muse 3C). The main difference between the models “Muse 1C”, “Muse 3C” and “Muse 3A” is that “Muse 3A” uses a single, powerful, precision Coreless DC motor. A system like this ensures less noise coming from the drive system which may be transferred to LP and phono cartridge. 

Turntable “Muse 3A” has a digital control system indicator, which specifies the rotating speed of the platter and other important operating system information. In addition, the display shows an inclinometer connected to a very accurate level, which is important for correct adjustments of horizontality. 

“Muse 3A” allows a customer to mount one or two tonearms (possible centre or off-centre mounting), of an effective length from 9.5″ to 12″ inclusive.

Check more

   

REED 2B

Our newest tonearm Reed 2B offers our users three new operating possibilities: 

1) A possibility to use heavier cartridges, up to 35 grams. The low-friction, ceramic bearings are used in this tonearm; 

2) Tonearm “2B” comes fully assembled; it is only needed to mount the tonearm and adjust settings like VTA, VTF, azimuth and anti-skating; 

3) The anti-skating force can be easily changed independently at the beginning and end of the record. This feature is practical for all newer cartridges’ users, exceptionally because of a variety of the new cartridge’s stylus’ shapes causing different friction forces between the stylus and record groove.

Check more