Reed 2B Tonearm for Turntable 9,5"

Reed

kr.23.680,00
(No reviews yet) Write a Review
SKU:
REED2B9-8F5DED71
Availability:
Product will be shipped within 4-6 weeks. Product is hand built to your specifications. We will let you know exact delivery time after order received.
Shipping:
Free Shipping
Effective length:
9,5"
Effective mass:
8-12g, depending on armwand and headshell material
Tonearm height:
26-46mm
Overhang:
17mm
Offset angle:
22,9 deg
Adding to cart… The item has been added

Our newest tonearm Reed 2B offers our users three new operating possibilities:

1) A possibility to use heavier cartridges, up to 35 grams. The low-friction, ceramic bearings are used in this tonearm;

2) Tonearm “2B” comes fully assembled; it is only needed to mount the tonearm and adjust settings like VTA, VTF, azimuth and anti-skating;

3) The anti-skating force can be easily changed independently at the beginning and end of the record. This feature is practical for all newer cartridges’ users, exceptionally because of a variety of the new cartridge’s stylus’ shapes causing different friction forces between the stylus and record groove.

 

Short theory.

As we already know, when a stylus rides in a groove, the friction force provides a forward force which is tangential to the record groove. (Fig.1. Anti-skating)

F = μN    μ – coefficient of friction, N – stylus force (VTF).

 

Reed 2B Antiskating

 

 

Whereas the direction of this force F is displaced 90°+ α from the line between the pivot and the stylus O2-A, this force provides a clockwise moment M around the pivots O2 (Fig.1. Anti-skating), which tends to drag the stylus towards the spindle O1.

In case to avoid the force imbalance while the stylus bears against the inner groove wall, moment M should be eliminated completely at any position on the record. This moment can be expressed by the following equation:

 

Antiskating equation

 

While the F, L and D are constant factors, and R varies accordingly to the stylus’ position, moment M can be expressed as a function of R (Fig.2 Theoretical). Practically an experiment was executed to determine skating force at different points of a record. Instruments used for this test were: fully matte and smooth test vinyl and tonearm Reed 3P with a “Phasemation PP-2000MC” cartridge that was subjected to 1.9 grams vertical tracking force during testing (Fig 3. Practical). Differences in skating force are clearly noticeable at the beginning, middle and end of the record.

 

 

Reed 2B Antiskating: theoretical, practical.

 

Theoretically, it is known that moment M can be eliminated by providing equal compensation in the opposite direction (-M). (Fig.1.). In most cases, M is applied as a constant force, therefore the side thrust is completely eliminated only at a few positions on the record. To conclude, a tonearm with adjustable anti-skating force depending on the position on the record (diameter) is highly demanded.

Tonearm “Reed 2B” has the possibility to control anti-skating force by adjusting two anti-skating regulation handles at any time while playing a record.

 

SPECIFICATIONS
Effective length 9.5″ 10.5″ 12″
Mounting distance, mm 223 251.6 295.6
Pivot to spindle distance, mm 223 251.6 295.6
Overhang, mm 17 15.4 13.4
Offset angle, deg 22.9 20.7 17.6

 

SAMPLES OF FINISH

Pictures below are for illustration of finishing only; tonearm model may be different from described above.

Seashell white

 

Tonearm Reed 2A seashell white

Black

 

Black tonearm 2A Reed

 

ARMWAND SAMPLE
Wenge

 

Wenge

Macassar Ebony

 

macassar-ebony

Cocobolo

 

Cocobolo

Teak light

 

Teak light armwand tonearm

Teak dark

 

Teak dark armwand tonearm

 
 
Approximate effective mass of Reed tonearm in grams

 

Armwand Effective lenght
9,5″ 10,5″ 12″
Wenge 10 12 14
Makassar ebony 12 14 18
Cocobolo 12 14 18
Teak (light, dark) 8 10 12

 

User manual

2 year